SAE AMS5355 Steel, Corrosion Resistant, Investment Castings, 16Cr - 4.1Ni - 0.28Cb - 3.2Cu, Homogenization and Solution
作者:标准资料网 时间:2024-05-18 04:26:40 浏览:9989
来源:标准资料网
下载地址: 点击此处下载
Product Code:SAE AMS5355
Title:Steel, Corrosion Resistant, Investment Castings, 16Cr - 4.1Ni - 0.28Cb - 3.2Cu, Homogenization and Solution Heat Treated or Homogenization, Solution, and Precipitation Heat Treated
Issuing Committee:Ams F Corrosion Heat Resistant Alloys Committee
Scope:This specification covers a corrosion resistant steel in the form of investment castings.These castings have been used typically for parts requiring good corrosion resistance and strength up to 600 °F (316 °C), but usage is not limited to such applications (See 8.3).Certain processing procedures and service conditions may cause these castings to become subject to stress-corrosion cracking; ARP1110 recommends practices to minimize such conditions. Where stress-corrosion is considered to be a factor, precipitation heat treatment should be performed at a temperature not lower than 1000 °F (538 °C).
Title:Steel, Corrosion Resistant, Investment Castings, 16Cr - 4.1Ni - 0.28Cb - 3.2Cu, Homogenization and Solution Heat Treated or Homogenization, Solution, and Precipitation Heat Treated
Issuing Committee:Ams F Corrosion Heat Resistant Alloys Committee
Scope:This specification covers a corrosion resistant steel in the form of investment castings.These castings have been used typically for parts requiring good corrosion resistance and strength up to 600 °F (316 °C), but usage is not limited to such applications (See 8.3).Certain processing procedures and service conditions may cause these castings to become subject to stress-corrosion cracking; ARP1110 recommends practices to minimize such conditions. Where stress-corrosion is considered to be a factor, precipitation heat treatment should be performed at a temperature not lower than 1000 °F (538 °C).
下载地址: 点击此处下载